M-Audio AV 30 Guide D'utilisation page 5

Appendices
Appendix A - Technical Specifications
Type:
Low-frequency
driver:
High-frequency
driver:
Frequency
response:
Crossover
frequency:
RMS SPL:
Signal-to-noise
ratio:
Input
connectors:
Polarity:
Dynamic power:
Input
impedance:
Input sensitivity:
Protection:
Indicator:
Power
requirements:
Cabinet:
Dimensions:
Weight:
Two-way desktop reference speaker
3" Diameter, polypropylene-coated, magnetically shielded with high-
temperature voice coil
1" Diameter, magnetically shielded silk cone tweeter
90 Hz – 20 kHz
3.3 kHz
101.5 dB @ 1 meter
> 90 dB (typical, A-weighted)
Left and right RCA line input and 1/8" aux input
Positive signal at "+" input produces outward low-frequency cone
displacement
10 Watts continuous, per channel into 4 Ω
10 k Ω unbalanced, 20 k Ω balanced
100 mV pink noise input produces 90 dBA output SPL at 1 meter with
volume control at maximum
RF interference, output current limiting, over temperature, turn on/off
transient, subsonic filter
Blue power LED ring around volume knob on front panel
100-120V/~50/60 Hz, 220-240V/~50/60 Hz
Vinyl-laminated MDF
7.9" (H) x 5.3" (W) x 6.3" (D); 20 cm (H) x 13.4 cm (W) x 16 cm (D)
11.7 lbs. (5.3 kg)
Specifications subject to change without notice
5