Electrical Connection - Franke FLI 605 XS LED Mode D'emploi Et Installation

ELECTRICAL CONNECTION

• Connect the hood to the mains through a two-pole
switch having a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Mainte-
nance) being sure that the connector of the feeding ca-
ble is correctly inserted in the socket placed on the
side of the fan.
Upper exhaust flue
• Slightly widen the two sides of the upper flue and
hook them behind the brackets 7.2.1, making sure that
they are well seated.
• Secure the sides to the brackets by using the 4 screws
12c (2,9 x 9,5) supplied.
• Make sure that the outlet of the extensions pieces is
aligned with the chimney outlets.
Lower exhaust flue
• Slightly widen the two sides of the flue and hook them
between the upper flue and the wall, making sure that
they are well seated.
• Fix the lower part laterally to the hood body by using
the 2 screws 12c (2,9 x 9,5) supplied.
EN
Flue assembly
7.2.1
2.1
2
2.2
12c
12c
12c
9
9