Description; Use; Identification - breviglieri MekFold 180 Manuel D'utilisation Et D'entretien

macchine agricole
DIMENSIONS
Model
180
- 340
MekFold
180
- 410
MekFold
180
- 460
MekFold

1.3.1 DESCRIPTION

180
The mod. « » folding rotary harrow comprises a central bearing frame (10 Fig. 1) with three-point hitch which cou-
MekFold
ples two harrow units at the sides (3 and 15 Fig. 1). These latter can be folded upwards and closed (Fig. 1), thus allowing the entire
machine to be transported on the roads (if is approved for road circulation in the country of use) or down very narrow passages.
This configuration allows work to be carried out in large areas. When the harrows are operating, the width of the implement
measures 3,4, - 4,1 and 4,6 meters, depending on the model. The two side harrow units are lifted and folded upwards thanks to a
hydraulic control operated from the tractor. The machine only operates when hitched to a tractor with an adequate power rating
(consult the technical specifications for the specific power). The implement is driven by the tractor via a driveline (with CE marking)
which engages with the central transmission unit (16 Fig. 1). Power is then transmitted to the two side final drives (4 Fig. 1) which
operate the various blade rotors (14 Fig. 1).

1.3.2 USE

180
The mod. « » rotary harrow is solely designed for use in agriculture in order to prepare, work and break up the
MekFold
soil. One single person seated in the driver's seat of the tractor is able to carry out all the various operations. Any other use
of the machine differing from the explanations given in this manual relieves for Manufacturer from all and every liability for
deriving damage to persons, animals or property.

1.4 IDENTIFICATION

Each machine is provided with an identification plate (12 Fig. 1) with the following data:
▪
«CE» marking
▪
Manufacturer's name and address
▪
A) Machine model
▪
B) Machine version
▪
C) Serial number
▪
D) Weight (in kg)
▪
E) Year of manufacture
The data on the identification plate of the machine should be copied into the last page of this manual and must always be stated
when spare parts and/or assistance are required.
180
MekFold
Fig.2
A B
382 350
430 422
470 462
- 20 -
C D
160 140