Touch Screen - John Bean B800 Manuel D'utilisation

2
3

Touch Screen

16
1
4-3
4-3b
Layout
4.1 The screen
Fig. 4-3 Screen with display fi elds
1 Display fi eld
2 Information fi eld
3 Commands fi eld
The screen reads out inputs, helpful information, all
measured data and possible error codes.
Description of display fi elds
Each fi eld of the screen has a specifi c function.
1 Display fi eld
- Rim dimensions (editable).
- Balancing modes (editable).
- Unbalance value.
- List of Counters.
- C codes (User Codes).
- Help information.
2 Information fi eld
- Number of the installed program version.
- Measurements of the wheel being processed.
- Operating conditions icons.
- Error codes.
3 Commands fi eld
The pictographs illustrating basic and special
functions are located here.
Each key has an icon showing the specifi c function
it is used to retrieve.
Touch Screen Display
In the Touch Screen interface, in order to have a touch
response, you need to tap and release the area on the
screen with your fi nger (Fig. 4-3b).
The operator can hear a confi rmation tone, whenever
their own touch performs an action connected with
icons, buttons, text or images on the screen.
........