The cabinet should be cleaned internally with a mild soap solution at suitable intervals and
checked thoroughly before it is put into operation again.
For the external maintenance – use stainless steel polish.
Cleansing agents containing chlorine or compounds of chlorine as well as other
corrosive means, may not be used, as they might cause corrosion to the stainless panels
of the cabinet and the evaporator system.
The compressor compartment and in particular the condenser must be kept free from dust
and dirt. This is best done with a vacuum cleaner and a brush.
The air filters on the condenser and the front panel can be removed and cleaned in a
dishwasher at max. 50°C.
Service
The refrigerating system and the hermetically sealed compressor require no maintainance.
However the condenser and air filter requires regular cleaning.
If refrigeration fails, first look to see whether the cabinet has been unintentionally switched
off, or whether a fuse has blown. If the cause of failure cannot be found, contact your
supplier quoting TYPE, PART NO and SER. NO of the cabinet. This information can be
found on the nameplate.
Placement of the nameplate:
Disposal
If the cabinet is to be disposed of, please do so in an environmentally correct way. There
are special requirements/conditions to be observed.
765041114
Made in Denmark
Climate class
Type
Volt
Hz
Part no.
Watt
Serie no.
Watt
Heating element
prod. no.
gr
Refrigerant
20