Display Background Illumination; Swap; Contents Of The Form Printout - KERN and SOHN KERN CKE Mode D'emploi

7.2.4 Display background illumination

Switch on the balance and the zero display, then call-up the balance menu as specified in
chapter 1. Select menu item „Backlight" using the button necessary for the respective
model. Acknowledge by pressing the „YES" button in order to switch on the background
illumination permanently. By pressing the „NO" button, the background illumination is
switched off.
If the background illumination shall be switched off time-controlled (to save the battery),
press the respective button for continuing the menu to select the menu point „Backlight
auto" and confirm by pressing the „YES" button. The background illumination will be
switched off automatically 10 sec after having reached a stable weighing value.

7.2.5 Swap:

 Strong filtering -

7.2.6 Contents of the form printout:

MODE / PRINTER / PRINTERFORM
REF / YES
Var 1 Type xx = Gross
Var 2 Type xx = Net
Var 3 Type xx = Tare
Var 4 Type xx = Pretare
Var 5 Type xx = Pcs / %
Var 6 Type xx = * / Mw
Var 7 Type xx = Numerator
CKE/CDS-BA-e-1728
Setting under point 1 (Mode-Menu)
MODE
MODE
Printerform
Var 1 Row xx XXxx
Gross value active
Line 2
Column 14
Printout "Gross" line 2 / column 14
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1. line
xxxxxxxxxxxxxG
Var 1 Col xx
MODE
Var 1 Type 02 = Gross
Var 1 Row 02
Var 1 Col 14
15000.0g xxxxxx 2. line
17