HQ Power VDP1001RGYLD9 Notice D'emploi page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

b. Back
6. Cooling fan intake (L) and outlet (R)
7. a. Signal in: standard DMX512 cable connection to a DMX controller or connection used to run projector in a
master-slave chain
b. Signal out: standard DMX512 cable connection to a DMX controller or connection used to run projector in a
master-slave chain
8. Mode selection switch
9. DIP switches: allow you to assign your projector a DMX address as well as select operation modes
10. Sound sensitivity control for use in sound mode
11. Remote interlock connector: DE-9 connector to the remote interlock which stops the laser beam emission once
the connection loop has been opened
12. Power switch: turn the unit on or off. Make sure the unit is turned off before connecting to the mains
13. Locking system: when locked, the unit will stop emitting the laser beam but will remain active
14. Power cord input storing the internal fuse
5. Operation
Your VDP1001RGYLD9 is designed to operate using the DMX512 protocol which allows you to control the projector
using a DMX512 controller. However, a profile must be created for some controllers. By following the instructions
below, you will be able to ensure a safe use of your projector.
Your projector can be operated using three modes: DMX512 mode, master-slave mode or stand alone operation.
Additionally, the device can be remotely operated from a DMX512 remote controller. It features over 300 effects
triggered by the above modes.
a. Detailed DMX Values per Channel
Channel
Channel 1
Channel 2
Channel 3
POSITION X
Channel 4
POSITION Y
Channel 5
SCANNING SPEED
DYNAMIC PATTERN
Channel 6
PLAYING SPEED
STATIC PATTERN
Channel 7
Channel 8
SELECTION
Channel 9
COLOUR SEGMENT
REMARK
• There are 40 static effects, the size of the regular patterns are adjustable while the size of the irregular patterns
are not. The size of the 40 dynamic patterns is not adjustable.
• The circle patterns feature colour segment function and are controlled from channels 8 and 9.
VDP1001RGYLD9_v2
Function
From
1
MODE
11
121
PATTERN
0
0
0
0
0
0
SIZE
0
COLOUR
45
135
225
0
To
10
Laser off, laser and scanner stop working
120
Dynamic patterns
255
Static patterns
255
Assign one of the 40 static / dynamic patterns
255
Adjust position X
255
Adjust position Y
255
0 = fast, 255 = slow
255
0 = fast, 255 = slow
255
0 = small, 255 = large
44
Selection of red, green and yellow monochromatic laser
134
2-colour combination creating 6 arrangements / effects
224
3-colour combination creating 6 arrangements / effects
255
Random multicolour combination
255
DMDE into segment 1 to 51
5
Description
VELLEMAN

Publicité

Table des Matières
loading

Table des Matières