Nailer Operation - Hitachi NT 65M2 Manuel D'instructions

(3) 1 Insert nail strips one by one from above the magazine.
2 Slide nails forward in the magazine.
(4) 1 While holding the nail feeder adjust the magazine cover in place.
2 Slide the nail feeder slowly forward until it contacts nails.
NOTE:
● Use nails at least 5 nails remaining.
● Slide the nail feeder SLOWLY forward.
If the nail feeder is released roughly, it may be stuck between the magazine and nails,
which makes mis-feeding trouble.

NAILER OPERATION

Read section titled "SAFETY"(pages 4 – 7).
1
Magazine
2
Nail strips
Magazine cover
Nail feeder
2
1
DANGER
● Operators and others in work area
MUST wear safety glasses with side
shields which conforms to ANSI Z87.1
specifications.
English
17