Nailer Operation - Hitachi NR 90AC2 Manuel D'instructions

English
Magazine
(2) Slide the nail strip forward in the magazine.
The nail strip should pass the nail stopper.
(3) Pull the nail feeder (B) back to engage the nail feeder
(A) to the nail strip.
Nail Feeder (B)
NOTE:
Quietly push the Nail Feeders (A) and (B) against the nail.
If the Nail Feeders (A) and (B) are released behind the
magazine and bumped against the nail, the connecting
plastic of the nail can be damaged.
Use nail strip of more than 5 nails.
The Nailer is now ready to operate.
Removing the nails:
1 Pull the nail feeder (B) backward.
2 Return the nail feeder (B) forward quietly while
3 Push the nail stopper toward the magazine side, and
Nail
Stopper

NAILER OPERATION

Read section titled "SAFETY"(pages 4 – 6).
5
— 12 —
pushing the nail feeder (A).
pull out nails from the back of the magazine.
2
Nail Feeder (B)
Nails
DANGER
Always wear eye protector with side shields which
conforms to ANSI Z87.1 specifications.
WARNING
Never point Nailer toward yourself or anyone else.
Never carry with finger on trigger.
Remove finger from trigger when not driving nails.
Never place your hands or feet closer than 8 inches
(200 mm) from firing head when using.
Do not drive nails on top of other nails or with
Nailer at too steep of an angle; nails can ricochet
and hurt someone.
1
Nail Feeder (A)
Nail Stopper
3