Installation; Installing The Appliance - AEG MCD2664E Notice D'utilisation

Masquer les pouces Voir aussi pour MCD2664E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42

INSTALLATION

The microwave can be fitted in position A or B:
Position
A
B
Measurements in (mm)

Installing the appliance

1. Remove all packaging and check carefully for any
signs of damage.
2. Fit the appliance into the kitchen cupboard slowly,
and without force, until the front frame of the
oven seals against the front opening of the
cupboard.
3. Ensure the appliance is stable and not leaning.
Ensure that a 4 mm gap is kept between the
cupboard door above and the top of the frame
(see diagram).
Fixing Option 1:
Fix the oven in position with the screws provided. The
fixing points are located on the top and bottom corners
of the oven.
Fixing Option 2:
Please see the template sheet supplied with this oven.
Important: Ensure the bottom of the oven is 85 cm or more above the floor.
It is important to ensure that the installation of this product conforms to the
instructions in this operation manual and the conventional oven manufacturer's
installation instructions.
Niche size
W
D
H
560 x 550 x 450
560 x 500 x 450
Installation
Position A
Conventional
oven
185
Position B
4 mm

Publicité

Table des Matières
loading

Table des Matières