Trotec TTK 800 Manuel D'utilisation page 31

Activities for before the start of maintenance
1. Do not touch the mains plug with wet or damp hands.
2. Before any work, detach the mains plug!
Maintenance tasks at the electrical equipment or
the air-conditioning technology must only be
carried out by specialist companies for cooling and
air-conditioning or by TROTEC
Visual check for dirt in the inside of the device
1. Remove the air filter (see chapter "Cleaning the air inlets and
the air filter").
2. Shine a torch through the opening of the device.
3. Check the inside of the device for dirt.
4. If you find dirt, use a high pressure cleaner to clean the device
according to "Cleaning the air inlets and the air filter".
5. Put the air filter back in.
B - 13
Cleaning the air inlets and the air filter
A.
®
.
B.
C.
D.
Operating Manual – Construction dryer TTK 800
50 cm
Caution!
After you have cleaned the device with a high pressure
cleaner, check the air filter, which you have already
removed, for damages. The corners and edges must not
be rounded or misshaped.
Before reinserting the air filter, ensure that it is dry and
is not damaged!
Read the chapter "Maintenance intervals" and replace
the air filter punctually!
50 cm
90°
EN