Operating Manual - Construction Dryer Ttk 800; Operation - Trotec TTK 800 Manuel D'utilisation

Operation

• After being switched on, the device operates fully automatical-
ly.
• Avoid open doors and windows.
Positioning
When positioning the device, observe the minimum distance from
walls of other objects as described in chapter "Technical data".
C
D
• Set the device in a stable position. Only use the device in its
working position.
• When positioning the device, keep a sufficient distance away
from sources of heat.
• If possible, set the device in the middle of a room. If using mul-
tiple devices, ensure that the spaces between devices is equal.
• When positioning the device in wet areas, secure the device lo-
cally with an RCD (Residual Current protective Device) which
complies with the appropriate regulations.
• Ensure that extension cords are completely unrolled.
• Ensure that power supply's voltage and current comply with
the specifications on the device's nameplate.
• When using a generator, ensure that the generator supplies at
least 4 kW of power (device starting current can exceed the
nominal current by four or five times. Also note this fact when
using several devices at one generator).
EN
A
B
C
Operating Manual – Construction dryer TTK 800
Position the device as follows:
A.
B.
C.
B - 8