Supplied Components; Preparing The Remote Control Unit; Installing The Batteries - Sharp PN-C703B Manuel D'installation

If any component should be missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Power cord: 1
 Remote control unit: 1
 Remote control unit battery
(R-6 ("AA" size)): 2
 CD-ROM (Utility Disk): 1
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Preparing the Remote Control Unit

Installing the batteries

1. Press the cover gently and slide it in the direction of the
arrow.
2. See the instructions in the compartment and put in the
supplied batteries (R-6 ("AA" size) x 2) with their plus (+)
and minus (-) sides oriented correctly.
3. Close the cover.

Supplied Components

 Setup Manual (this manual): 1
 Touch pen: 1
 Tray: 1
 Tray mounting screws (M3) : 5
 Eraser: 1
 Cable clamp (affixing type): 2
 Stand hole protection cover: 2
 Cover SHARP logo: 1
Place this sticker onto the SHARP logo to cover
the logo.
5
E