Installation Instructions; Leveling Instructions - Danby DWC350BLP Guide D'utilisation Et D'entretien

Installation Instructions

LOCATION
• Select a location with a strong, level fl oor.
• Remove the exterior and interior packaging.
• Wipe the outside thoroughly with a soft, dry cloth and the inside with a wet, lukewarm cloth.
• Avoid placing the unit in a narrow recess or near any heat source, direct sunlight or moisture.
• Let air circulate freely around the cabinet.
• Keep the rear and sides of the wine cooler at least 12.7 cm (5 inches) away from all adjacent
walls.
• DO NOT use this appliance outdoors. This appliance is intended for household use only. Do not
attempt to operate or store this appliance outdoors.
• DO NOT build this unit into an enclosure. This appliance is designed for a free-standing
application only and is not intended to be built-in.
FEATURES

LEVELING INSTRUCTIONS

Beneath the wine cooler there is leveling leg on the hinge side of the
unit. It is important that your wine cooler is level. To level the unit:
1. Move the wine cooler to its fi nal location.
2. Turn the leveling leg clockwise as far as it will go, until the top of
the foot is touching the bottom of the chassis.
3. Slowly turn the leveling leg counter-clockwise until the unit is level.
1. Thermostat dial: externally mounted rear wall
thermostat. Controls the temperature inside the wine
cooler.
2. Tempered glass door: tinted for UV protection
while still allowing for easy interior viewing.
3. Magnetic Door Gaskets: Tight fi tting seals retain all
the cooling power and humidity levels.
4. Plastic coated shelves: Odor resistant, rustproof
and removable for easy cleaning.
5. Leveling Legs
6. Interior light (not shown): illuminates the
compartment.
5
Fig A
Raises
the Leg
(lowers
Lowers
the unit)
the Leg
(raises
the unit)