Connecting The Tv And Receiver; Connecting The Aerial And Video Cassette Recorder (Vcr) - JVC PD-42V31BUE Manuel D'instructions

Connections

Connecting the TV and receiver

Use the supplied system cable to connect the TV to the
receiver.
The two connectors are of different shapes.
Ensure that the pins on connector 1 are oriented correctly,
press the connector into the socket, and tighten the screws at
left and right to lock it in place.
Press connector 2 firmly into place until it is locked.
1
Disconnecting the system cable
Release connector 1 by unscrewing the screws at left and
right and removing it from the socket.
Release connector 2 by removing it from the socket while
pressing the release bottoms on either side.
1
8
Connecting the aerial and video
cassette recorder (VCR)
2
Back of the receiver
2
• The connecting cables are not provided.
• For further details, refer to the manuals provided with
the devices to be connected.
If you are connecting a VCR, follow A A A A → → → → B B B B → → → →
C C C C in the diagram opposite.
If you are not connecting a VCR, follow 1 1 1 1 .
To use the T-V LINK functions, you must have a T-V
LINK compatible VCR connected by a SCART cable C to
the EXT-2 terminal on the TV. For details about T-V LINK
functions, see "T-V LINK functions" on page 11.
• You can watch a video using the VCR without doing C.
For details, see your VCR instruction manual.
• To connect more equipment, please see "Connecting
external equipment" on page 37.
• To connect additional audio equipment, see "Connecting
Speakers/Amplifier" on page 38.
• If you connect a decoder to a T-V LINK compatible
VCR, set the DECODER (EXT-2) function to ON. For
details, see "Using the DECODER (EXT-2) function"
on page 36.
Otherwise, you will not be able to watch scrambled
channels.
Aerial
75-ohm Coaxial Cable
21-pin
SCART
Cable
VCR
AV IN/OUT
Terminal
1 3
EXT- EXT-
S
2
EXT-
Pr Pb Y
S
4
EXT-
R L
75-ohm
Coaxial
Cable
To Aerial
Input
To Aerial
Output