Connecting An Hdmi Or A Dvi Device To The Hdmi Input - JVC LT-19HA22U Mode D'emploi

Connecting an HDMI or a DVI device to the HDMI input

The HDMI input receives digital audio and uncompressed video from a HDMI equipped device or
uncompressed digital video from a DVI equipped device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it
is necessary to use separate analogue leads to transfer the audio signals.
Select the HDMI input mode (see P.12).
LT-19.../LT-22....
To DVI output
DVI device
HDMI device
To HDMI output
LT-26.../LT-32....
Selecting the HDMI signal
1
Select /Advanced Setting/HDMI Mode option.
2
Then press or
Auto: Auto (factory setting), can remain in this mode. Change not necessary.
PC: PC (for PC), if desired.
Video: Video (for Video), if desired.
3
Press MENU to exit the menu.
Note:
• Follow the user's manual that came with the HDMI-system, which you try to connect to this TV.
If there is no picture available via HDMI-connection, do connect via SCART-cable first. Use the HDMI-system's remote-
control to call the HDMI-system's setup-menu onto the screen.
Follow the HDMI-system's manual, to set its video-output to HDMI.
When successfully set to HDMI, select this TV's HDMI-input, as described on page 12 (Select Video Input).
• Some devices may not operate properly with the TV.
To PC/DVI AUDIO input
Audio cable (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
or
HDMI cable
(type A connector)
(not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
To DVI output
DVI device
HDMI cable
or
(type A connector)
HDMI device
(not supplied)
To HDMI output
Audio cable (not supplied)
To PC/DVI AUDIO input
to select the desired mode.
TV (Rear view)
(not supplied)
TV (Rear view)
TV (Side view)
TV (Side view)
HDMI3 (LT-32....)
TV (Rear view)
23