Table Des Matières; Contents; Note The Following Before Starting - Husqvarna 536LiPX Manuel D'utilisation

Contents

KEY TO SYMBOLS
Symbols on the machine: ...................................... 2
Symbols on the battery and/or on the battery
charger: ................................................................. 2
Symbols in the operator's manual: ........................ 2
CONTENTS
Contents ............................................................... 4
Note the following before starting: ........................ 4
INTRODUCTION
Dear customer! ..................................................... 5
WHAT IS WHAT?
What is what? ....................................................... 6
GENERAL SAFETY PRECAUTIONS
General power tool safety warnings ...................... 7
Personal protective equipment ............................. 9
Battery and battery charger .................................. 9
Machine's safety equipment ................................. 11
Cutting equipment ................................................. 12
ASSEMBLY
Fitting the loop handle .......................................... 18
Fitting the bar and chain ....................................... 18
Rotating the saw head .......................................... 18
Mounting the branch hook .................................... 19
Dismantling the impact guard ............................... 19
Harness ................................................................ 19
BATTERY HANDLING
Battery .................................................................. 20
Battery charger ..................................................... 20
Transport and storage ........................................... 21
Disposal of the battery, battery charger and
machine ................................................................ 21
STARTING AND STOPPING
Check before starting ............................................ 22
Connect battery to the machine ............................ 22
Starting and stopping ............................................ 22
WORKING TECHNIQUES
General working instructions ................................ 23
Forestry clearing ................................................... 24
Stem limbing ......................................................... 25
MAINTENANCE
Inspection and maintenance ................................. 26
Troubleshooting schedule ..................................... 27
Maintenance schedule .......................................... 28
TECHNICAL DATA
Technical data ....................................................... 29
4 - English
CONTENTS
Note the following before
starting:
Please read the operator's manual carefully.
Maintenance, replacement, or repair of the emission
control devices and system may be performed by any
nonroad engine repair establishment or individual.
!
!
!
WARNING! Long-term exposure to noise
can result in permanent hearing
impairment. Always use hearing
protection.
WARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
Your warranty may not cover damage or
liability caused by the use of non-
authorized accessories or replacement
parts.
WARNING! Used incorrectly or
carelessly, a brush saw can be a
dangerous tool which can cause serious
and even fatal injury. It is extremely
important you read and understand the
contents of this user manual.