Operation With The Remote Control Unit; Automatic Operation - Sanyo KHS0971 Mode D'emploi

1. Automatic Operation

12
Operation with the Remote Control
Unit
This unit automatically switches between cooling operation and heating operation
according to the difference between the room temperature and the temperature
setting.
Check that the circuit breaker on the power panel is turned on.
NOTE
Once mode is selected and the unit is preset by following the steps below, you
can have the air conditioner automatically bring the room to the desired
temperature simply by pressing the ON/OFF operation button.
STEP 1
STEP 2
To stop the air conditioner, press the ON/OFF operation button again.
• To change the temperature setting; press the temperature setting buttons and
NOTE
change the setting to the desired temperature.
STEP 2
STEP 1
Press the MODE selector button to
Press the ON/OFF operation button.
.
OI-802-12-EG