Operation With The Remote Control Unit - Sanyo KS1872 Mode D'emploi

01_KS1872_En.fm Page 12 Tuesday, October 18, 2005 9:30 AM
1. Operation
12
Operation with the Remote Control
Unit
STEP 4
STEP 5
Check that the circuit breaker on the power panel is turned on.
NOTE
Press the setting buttons as described below and change the settings as desired.
STEP 1 Press the MODE selector button and select the desired mode.
For dehumidifying operation
For cooling operation
For fan only operation
STEP 2 To start the air conditioner, press the ON/OFF operation button.
STEP 3 Press the TEMP. setting buttons to change the temperature
setting to the desired temperature.
Adjustable temperature range:
STEP 4 Set the FAN SPEED selector button to the setting you want.
STEP 5 Press the FLAP button and set the airflow direction as desired.
(Refer to "Adjusting the Airflow Direction" on page 20.)
To stop the air conditioner, press the ON/OFF operation button again.
STEP 2
STEP 3
STEP 1
30 °C max. or 86 °F max.
16 °C min. 60 °F min.
→
→
→
OI-800-12-EG