Stopping The Appliance - Inventum VVW7040++ Manuel D'utilisation

3. Use the program selector button to choose another program.
4. Push the start/pause button.
The newly selected program will resume the course of the previously selected program.
DELAYING THE PROGRAM
Note:
The start time of a program can be delayed for a maximum of 24 hours.
1. Push the timer button to delay the start time of a program.
2. Push the start/pause button.
3. Push the timer button to increase the time by 1 hour.
4. Push the start/pause button to activate the timer.
Note:
Set the time to 0 to cancel the timer.
The program will start when the timer has finished.
RESETTING THE PROGRAM
You can reset the program while the appliance is running.
1. Push and hold the start/pause button for 3 seconds. The program-step indicator for End flashes.
The water inside the appliance drains in about 30 seconds.
2. Wait until the program-step for End comes on.
3. Push the on/off button to cancel the program.
ACTIVATING AND DEACTIVATING THE CHILD LOCK
Activating the child lock
1. Push the tablet detergent button for 3 seconds to activate the child lock. All indicators flash and the display shows
CL.
Deactivating the child lock
1. Push the tablet detergent button for 3 seconds to deactivate the child lock. All indicators and CL on the display
flashes twice.

STOPPING THE APPLIANCE

Note:
The appliance is silent for 40 to 45 minutes during the drying process.
1. Wait until the program has finished and the program-step indicator for End comes on.
2. Push the on/off button to switch off the appliance.
You can slightly open the door of the appliance after you switch it off in order to decrease the drying time.
3. Wait a few minutes before you unload the appliance. The dishes are very hot and can break.
48 • English