Safety And Installation Instructions; Delivery; Installation; Positioning The Appliance - Inventum VVW7020 Mode D'emploi

1

safety and installation instructions

• Please read these instructions before operating the appliance
and retain for future use.

DELIVERY

• Check for any damage to the packaging or the appliance during
transportation. Never use a damaged appliance, but contact your
supplier.
• Dispose the packing materials according to local regulations.
• Keep the material out of reach of children. Danger of suffocation.

INSTALLATION

• This appliance should be installed and repaired by an authorised
service only.
• Place and connect the appliance according to the installation
regulations.
• Make sure that while placing the appliance is not plugged in.
• Check whether the indoor electrical fuse system is connected
according to the regulations.
• All electrical connections must match the values indicated on the
rating plate.
• If the connecting cable is damaged, it may only be replaced by the
service organisation of the manufacturer or equinvalently qualified
persons.
• Pay special attention and be sure that the appliance is not placed on
the electricity supply cable.
• Never use an extension cord or a multiple socket for making a
connection. The plug should be comfortably accessible after the
appliance has been installed.
• After installing the appliance to a suitable place, run it unloaded for
the first time.

POSITIONING THE APPLIANCE

• When determining a place to position the dishwasher, make sure
you choose a place where you can easily load and unload your
dishes.
• Do not place the appliance in any location where there is the
probability for the room temperature to fall below 0°C.
• Position the appliance close to a water tap or drain and socket. Take
into consideration that the connections will not be altered when
they are made.