Franke ATMOS 604 Mode D'emploi Et Installation page 23

• To fit the Hood in wall units deep 340mm,
use the spacers A and C
• Mount the spacer A (see pag.16a); the spacer C
grabs the A, then fix it as shown in the figure with screws (Ø4x6)
• The number of the screws depends on the lenght
of the Hood (56/86/116)
C
• To fit the Hood in wall units deep 360mm,
use the spacers A, B and C
• Mount the spacer A (see pag.16a); then the spacer B
as shown in the figure with screws (Ø4x6)
• In closing, mount the spacer C with screws (Ø4x6)
• The number of the screws depends on the lenght
of the Hood (56/86/116)
B
C
GB
Wall Unit 340 mm
Wall Unit 360 mm
21