Automatic Pairing, For First Use; Connecting; Disconnecting - Marmitek BOOMBOOM 80 Guide Utilisateur

AUTOMATIC PAIRING, FOR FIRST USE

The BoomBoom 80 is able to remember up to 8 paired devices. As a
result, it is not necessary to pair a device every time you connect it. If a
th
9 device is paired with the BoomBoom 80, the device which has been
originally paired with the BoomBoom 80 will be deleted from its
memory.
1. Locate your Bluetooth music source in the vicinity of the
BoomBoom 80. The best distance is around 1 metre.
2. Ensure that the BoomBoom 80 is on.
3. The LED starts to blink blue.
4. Switch your device's Bluetooth function on according to the
instructions of your device and go to Bluetooth settings.
5. Scan for new devices and select the name "Music Receiver".
6. If the Bluetooth connection process requires a password, enter
"0000". The BoomBoom 80 then connects with your device by
lighting up a steady blue LED. The connection has now been
made and your device is linked to the BoomBoom 80. You can
now play and control the music in your device on your sound
system.
! You can link to up to 8 devices. However, only 1 device can be
connected to the BoomBoom 80 at one time.

CONNECTING

The BoomBoom 80, depending on the Bluetooth audio source, will not
always automatically connect to the last device it was connected to.
When connected, the blue LED light will light up. When not connected,
the blue LED light will flash at a slow rate. Only one device can be
connected at the same time to the BoomBoom 80. Go to the device's
Bluetooth settings and select the "Music Receiver". A connection will
then be made.

DISCONNECTING

To disconnect the BoomBoom 80, for example, in order to connect the
BoomBoom 80 to another Bluetooth device, briefly press the
disconnect button in the centre of the BoomBoom 80.
6 © MARMITEK