Teuco HYDRO BASIC 543 Manuel De L'utilisateur page 16

EN
INSUFFICIENT PRESSURE DURING
SANITIZATION
(BASIC E - BASIC G)
The sanitizing process stops, the HYDRO
key is lit at high intensity and flashing at low
frequency.
After 5 minutes the display will return to
standby.
Suction openings dirty or clogged.
Clean the suction openings.
NO HYDRO LEVEL WHILE SANITIZING
(BASIC E - BASIC G)
The sanitizing process stops or will not start;
the SANITIZE key is lit at high intensity, the
HYDRO key is lit at high intensity and flashing
at low frequency.
After 5 minutes the display will return to
standby.
Add water to the tub.
In case of breakdown or incorrect operation (e.g., anomaly in the pump, control unit, power, unit ...)
contact your nearest Teuco authorised assistance centre (see list of Teuco authorised assistance
centres). The manufacturer cannot be held responsible for damage caused by appliances that
have been improperly tampered with.
16
BASIC