Bluetooth - Audio - JVC KW-R940BTS Manuel D'instructions

Bluetooth®
The connectivity result flashes on the display.
"PAIRING OK" and/or "HANDS-FREE OK"*1 and/or "AUD.STREAM OK"*2 and/
or "PBAP OK"*3: Compatible
*1 Compatible with Hands-Free Profile (HFP)
*2 Compatible with Advanced Audio Distribution Profile (A2DP)
*3 Compatible with Phonebook Access profile (PBAP)
After 30 seconds, "PAIRING DELETED" appears to indicate that pairing has
been deleted, and the unit exits check mode.
• To cancel, press and hold SOURCE B to turn off the power, then turn on
the power again.
Bluetooth — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
1 Press SOURCE B repeatedly to select BT AUDIO (or press SOURCE on
the remote control).
2 Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause Press the volume knob.
Select group or Press 1 J / 2 K.
folder
Reverse skip/ Press S / T.
Forward skip
Reverse/Fast- Press and hold S / T.
forward
On the remote control
Press d.
Press J / K.
Press H / I.
Press and hold H / I.
25
ENGLISH