Switching The Water Filter Counter On And Off; Dimming When Door Is Opened And Closed; Setting The Temperature Unit; Setting The Language - Gaggenau RF411704 Notice D'utilisation

en-us
Operating the appliance
Switching the water filter counter on
and off
If you have replaced the water filter with a particle filter,
switch the water filter counter off. It is not needed in this
case as the particle filter does not have to be replaced.
1. Press à button to open the main menu.
Press B button to move to the Basic settings menu.
2.
3. Press ™ button.
4. Press C button to move to the menu item Water filter
counter.
To change the setting, press % button.
5.
6. Confirm the selection by pressing ™ button.
Dimming when door is opened and
closed
If dimming is switched on, the light will slowly become
brighter when the door is opened, and then slowly darker
when it is closed.
Switching dimming on or off when opening and closing
the door
Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
Press ™ button.
3.
4. Press C button to move to the menu item Dimming
when door is opened and closed.
5. Press % button.
Press C button to move to the menu item On or
6.
Off.Confirm by pressing ™ button.

Setting the temperature unit

You can choose between the unit °C and °F.
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
3. Press ™ button.
4. Press B button to move to the menu item Temperature
unit.
Press % button.
5.
6. Press B C buttons to move to the required unit.
Press ™ button.
7.
The unit will be changed.
8. Press ' button to exit the menu.
18

Setting the language

Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button.
Press B button to move to the menu item Language.
4.
5. Press % button.
Press B C buttons to move to the required language.
6.
7. Press ™ button.
The display restarts, and the start screen is displayed.

Resetting to the factory settings

Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button.
Press B button to move to the menu item Factory
4.
settings.
5. Press % button.
A signal tone sounds, and a message to confirm reset
appears.
Press ™ button.
6.
All settings are reset to the factory settings.
7. Press ' button to exit the menu.

Switching demo mode on or off

The cooling function of the appliance is switched off. All
other functions can be used.
Note: Do not store any food items in demo mode as the
appliance remains at room temperature.
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
3. Press ™ button.
Press B button to move to the menu item Demo mode.
4.
5. Press % button.
6. Press B C buttons to select the setting On or Off.
Press ™ button.
7.
The setting is saved.
Press ' button to exit the menu.
8.