Switching The Water Filter Counter On And Off; Dimming When Door Is Opened And Closed; Ice And Water Dispenser Light; Ice And Water Dispenser Proximity Sensor - Gaggenau RF463706 Notice D'utilisation

en-us
Operating the appliance
Switching the water filter counter on
and off
If you have replaced the water filter with a particle filter,
switch the water filter counter off. It is not needed in this
case as the particle filter does not have to be replaced.
1. Press à button to open the main menu.
Press B button to move to the Basic settings menu.
2.
3. Press ™ button.
4. Press C button to move to the menu item Water filter
counter.
To change the setting, press % button.
5.
6. Confirm the selection by pressing ™ button.
Dimming when door is opened and
closed
If dimming is switched on, the light will slowly become
brighter when the door is opened, and then slowly darker
when it is closed.
Switching dimming on or off when opening and closing
the door
Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
Press ™ button.
3.
4. Press C button to move to the menu item Dimming
when door is opened and closed.
5. Press % button.
Press C button to move to the menu item On or
6.
Off.Confirm by pressing ™ button.

Ice and water dispenser light

Use this function to set how long the light will illuminate
the ice and water dispenser.
Setting ice and water dispenser light
Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
Press ™ button to open the menu item.
3.
4. Press C button to move to the menu item Ice and water
dispenser light.
5. Press % button to open the menu item.
18
6. Press C button to select the required duration.
Press ™ button.
7.
The setting is saved.
8. Press ' button to exit the menu.
Ice and water dispenser proximity
sensor
When the proximity sensor is switched on, the ice and
water dispenser light switches on automatically as soon
as a glass is held underneath.
Switching proximity sensor on or off
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
Press ™ button to open the menu item.
3.
4. Press C button to move to the menu item Motion
sensor.
5. Press % button to open the menu item.
Press B C buttons to move to the required setting.
6.
7. Press ™ button.
The setting is saved.
8. Press ' button to exit the menu.

Setting the temperature unit

You can choose between the unit °C and °F.
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
Press ™ button.
3.
4. Press B button to move to the menu item Temperature
unit.
5. Press % button.
Press B C buttons to move to the required unit.
6.
7. Press ™ button.
The unit will be changed.
8. Press ' button to exit the menu.