Signature SRUS5000XAQUA Instructions D'utilisation page 44

Controlling the temperature
The default temperature for the refrigerator is
set to "•"(5°C) and the freezer to "•"(-20°C). If
you want to change the temperature, follow
the instructions below.
Caution! When you set a temperature, you set
an average temperature for the whole
refrigerator cabinet. Temperatures inside each
compartment may vary from the temperature
values displayed on the panel, depending on
how much food you store and where you place
them. Ambient temperature may also affect the
actual temperature inside the appliance.
1. Fridge
Press the "Mode" for 3s to unlock the panel.
Press "Fridge"to set fridge temperature
between 2°C and 8°C as needed, and control
panel will display corresponding values
according to the following sequence with the
light on.
(Max) (•)
5
(Min)
After 3s, the light is off and temperature is set.
2. Freezer
Press the "Mode" for 3s to unlock the panel.
Press "Freezer"to set freezer temperature
between -15°C and -25°C as needed, and
control panel will display corresponding values
according to the following sequence with the
light on.
-42-