Night Vapor Rtf Contents; Night Vapor Bnf Contents; First Flight Preparation - Horizon Hobby Night Vapor Ultra Micro Série Manuel D'utilisation

Night Vapor RTF Contents

• Night Vapor Airframe
• 8 AA batteries
• 70mAh 3.7V 14C Li-Po battery
• 2.4GHz DSM2/DSMX Transmitter
• 1S 3.7V DC Li-Po battery charger, 0.3A charge rate

Night Vapor BNF Contents

• Night Vapor Airframe
• 4 AA batteries
• 70mAh 3.7V 14C Li-Po battery
• 1S 3.7V DC Li-Po battery charger, 0.3A charge rate
A DSM2/DSMX-compatible aircraft transmitter is required to complete your Night Vapor.

First Flight Preparation

Please note this checklist is not intended to be a replacement for the content included in this manual.
Although it can be used as a quick start guide, we strongly suggest reading through this manual completely
before proceeding.
‰ Remove and inspect contents.
‰ Install 4 AA batteries into the battery charger.
‰ Install 4 AA batteries into the included transmitter (RTF only).
‰ Begin charging the flight battery.
‰ Bind the receiver to your chosen Spektrum or JR DSM2/DSMX equipped transmitter (BNF only).
‰ Test the controls.
‰ Familiarize yourself with the controls.
‰ Confirm or set up control throws.
5