tau K125M Notice D'installation page 13

MANUFACTURER'S DECLARATION OF INCORPORATION
(in accordance with European Directive 2006/42/EC App. II.B)
Manufacturer:
Address:
Declares under its sole responsibility, that the product:
designed for automatic movement of:
for use in a:
complete with:
Model:
Type:
Serial number:
Commercial name:
Has been produced for incorporation on an access point (sliding gate) of for assembly with other devices used
to move such an access point, to constitute a machine in accordance with the Machinery Directive 2006/42/
EC.
Also declares that this product complies with the essential safety requirements of the following EEC direc-
tives:
- 2014/35/EU Low Voltage Directive
- 2014/30/EU Electromagnetic Compatibility Directive
and, where required, with the Directive:
- 2014/53/EU Radio equipment and telecommunications terminal equipment
Also declares that it is not permitted to start up the machine until the machine in which it is incorporated or
of which it will be a component has been identified with the relative declaration of conformity with the provi-
sions of Directive 2006/42/EC.
The following standards and technical specifications are applied:
EN 61000-6-2; EN 61000-6-3; EN 60335-1; ETSI EN 301 489-1 V1.9.2; ETSI EN 301 489-3 V1.6.1;
EN 300 220-2 V2.4.1; EN 12453:2000; EN 12445:2000; EN 60335-2-103.
The manufacturer undertakes to provide, on sufficiently motivated request by national authorities, all infor-
mation pertinent to the quasi-machinery.
Sandrigo, 20/11/2017
Name and address of person authorised to draw up all pertinent technical documentation:
Loris Virgilio Danieli - via E. Fermi, 43 - 36066 Sandrigo (Vi) Italy
Electronic control unit
Sliding Gates
Residential / Communities
Radioreceiver and battery charger board
K125M
K125M
see silver label
Control panel for T-ONE5B gearmotor
Legal Representative
_________________________________________
Loris Virgilio Danieli
13
TAU S.r.l.
Via E. Fermi, 43
36066 Sandrigo (Vi)
ITALY