Control Panel - Danby DPA140B1WDB-6 Manuel Du Propriétaire

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Swing button: Press to start the auto swing
feature. When auto swing is activated, press
again to stop the louver at the desired angle.
2. Timer button: Press to start the automatic timer.
Light will indicate whether a timer is set.
3. Mode button: Press to select the desired mode.
Modes will cycle in sequence with each press
of the button; auto, cool, dry, fan. Light will
indicate current mode.
4. Up and down buttons:
• Used to set the temperature.
• Press and hold both up and down buttons for
three seconds to change the temperature display
from °C to °F.
1 2
3
5. LED display:
• Shows the set temperature in °C or °F.
• Shows the timer settings.
• While on dry or fan mode, shows the room
temperature.
6. Fan and ionizer button:
• Press to select fan speed; low, medium or high.
Light will indicate current speed.
• Press and hold for three seconds to start the
ionizer.
7. Sleep button: Press to start the sleep feature.
8. Power button: Press to turn the appliance on or
off.
5
6
4
3sec
6
8
7