Control Panel; Operating Modes; Dry Mode - Danby DPA100E5WDB-6 Manuel Du Propriétaire

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Timer button: Used to set the automatic timer.
2. Fan button: Used to choose the fan speed.
3. Temperature control buttons: Used to increase or
decrease the set temperature.
4. Mode button: Used to choose the mode; cool,
fan or dry.
5. Power button: Used to turn the appliance on or
off.
Note: Images are for instructional purposes only.
Your control panel may look slightly different.

OPERATING MODES

Cool Mode
• Press the mode button to choose cool mode.
• Use the temperature control buttons to choose
the desired temperature.
• Use the fan button to choose the desired fan
speed.
• The temperature can be set within a range of 18
- 32°C (64 - 90°F).
• The exhaust hose should be installed during cool
mode to ensure the best results.
Fan Mode
• Press the mode button to choose fan mode.
• Press the fan button to choose the desired fan
speed.
• The exhaust hose does not need to be installed
during fan mode.
OPERATING MODES

Dry Mode

• Press the mode button to choose dry mode.
• The fan speed will be set to auto.
• The exhaust hose should be installed during dry
mode to ensure the best results.
• It may be necessary to install the continuous
drain hose during dry mode to remove excess
water.
Heat Mode
• Press the mode button to choose heat mode.
• Use the temperature control buttons to choose
the desired temperature.
• Press the fan button to choose the desired fan
speed.
• The temperature can be set within a range of 13
- 27°C (55 - 81°F).
• The exhaust hose should be installed during heat
mode to ensure the best results.
• It may be necessary to install the continuous
drain hose during heat mode to remove excess
water.
• Heat mode is not available on all models.
Smart Mode
• Press the mode button the choose smart mode.
• The appliance will choose whether to run cool,
fan or heat mode automatically based on the
ambient temperature in the air.
• Smart mode is not available on all models.
10