Control Panel - Danby DPA140HB1BDB-6 Manuel Du Propriétaire

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Swing and wireless connect button:
• Press to start the auto swing feature. When auto
swing is activated, press again to stop the louver
at the desired angle.
• Press and hold for three seconds to start using
the wireless connect feature.
2. Timer button: Press to start the automatic timer.
Light will indicate whether a timer is set.
3. Mode button: Press to select the desired mode.
Light will indicate current mode.
4. Up and down buttons:
• Used to set the temperature and timer.
• Press and hold both up and down buttons for
three seconds to change the temperature display
from °C to °F.
2
1
3sec
3
5. LED display:
• Shows the set temperature in °C or °F.
• Shows the timer settings.
• While on dry or fan mode, shows the room
temperature.
6. Fan and ionizer button:
• Press to select fan speed; low, medium or high.
Light will indicate current speed.
• Press and hold for three seconds to start the
ionizer.
7. Sleep button: Press to start the sleep feature.
8. Power button: Press to turn the appliance on or
off.
5
6
4
3sec
6
7 8