Télécharger Imprimer la page

Logger; Master/Slave Mode - AKO 15740 Manuel D'utilisation

Masquer les pouces Voir aussi pour 15740:

Publicité

Les langues disponibles

Les langues disponibles

4.- Setting and configuration
To access the programming menu, press the SET key for 5 secs.
If you have defined a password you must enter it and press SET again.

4.1- Logger

Parameters related to the logger's configuration.
Time zone:
Select the time zone in which the unit is installed.
Winter/Summer Schedule:
Changes the time setting from summer to winter and vice versa or allows you to select automatic execution of this
change (only in the European Union).
Date/Time
Configures the current date and time of the logger.
Recording interval
Defines the time that passes between the cap-
ture of one piece of data and the next. Allows
you to choose 1, 5, 15 or 30 minutes.
This parameter affects certain of the unit's char-
acteristics as shown in the table.
Access password
Define a 4-number password to access programming. This password will be requested every time you attempt to
access the programming menu. If you enter 4 zeros, the password is disabled.
Blank spaces are equivalent to a zero.
Clear data Log
Deletes all the data saved in the logger to date (clears the memory). To avoid accidental deletions, the unit will
request that you enter a numerical code, which can be found in the following table:
1
2
2421
5832
11
12
7145
3044
WARNING: This operation deletes all the data recorded by the unit to date. This data cannot be
recovered. On completion, the date and time will change to 00:00 hours on 01/01/09, and it will
therefore be necessary to set them again. All other parameters remain unchanged.

Master/slave mode:

Determines the logger's operating mode if several units are connected in a network (for more information, see chapter 5.1).
Slave address:
Configures the unit's MODBUS address within the network (for more information, see chapter 5).
Ext. Recording address no:
Assigns a slave (MODBUS) address to each of the six external inputs "n" (only active in MASTER mode).
Recording
interval
1 min.
5 min.
15 min.
30 min.
3
4
5
1294
5119
0547
13
14
15
6197
8134
4800
Storage capacity
80 days
1 year (aprox.)
3 years (aprox.) Last complete calendar
6 years (aprox.)
6
7
8168
3632
5901
16
17
18
3319
0237
5565
29
Capacity per memory
Fast printing
block
Last 7 memory
96 minutes
blocks
Last 7 memory
480 minutes
blocks
1 day
week
Last 7 memory
2 days
blocks
8
9
10
8533
1942
19
20
2098
4291

Publicité

loading

Ce manuel est également adapté pour:

1575015780157421575215782