Floor Mounting - aldes VMC double flux Dee Fly Compact Hygro Notice De Montage

FLOOR MOUNTING

Prohibited assemblies
Be careful that the direction of the exchanger and motor are correct!
Whether in an assembled or dissociated configuration,
the exchanger and motor must always be in the same
position to each other.
28
Floor-mounting
• Compulsory option: Dee Fly floor-
mounting kit. Plan for one kit per
casing (code 11023144)
• Feet mounted on each end of the
casing using screws (supplied)
• Anti-vibration mounts are used
to separate the motor from the floor
to limit the transmission of noise
• Screw the condensate discharge
to the heat-exchanger release
• Glue the bend to the white part
• Assemble the water trap to the bend.
This water trap runs without any water.
Be carreful to the direction (arrow)
• The water trap need to be
impervious, and not at
the atmospheric pressure