Surface Mounting - Perry Electric 1GA 47917MET/P Instructions Pour L'installation Et Mode D'emploi

SEMI FLUSH mounting
Optional Support for semi flush mounting
(
may be purchased separately)
C
G
B A
B
Fig. 13
D

SURFACE mounting

Base for surface mounting
C
A
A
B
7
A
E D
Fig. 14
18
To ensure correct fitting of the gas detector to the
support or surface-mounted base, make sure the
latter are not distorted by overtightening of the
A A
fixing screws in the round or rectangular flush-
mounted box.
A Holes for fixing: -
- the support : on round or rectangular flush-mounted
box
- the base : surface-mounted, on round or rectangular
flush-mounted box
B Passage of wires from: -
round or rectangular flush-mounted box,
corrugated tube (surface-mounted)
C Coupling lugs for detector -
D - Coupling slot for detector
E Passages for wires from wall raceway -
(remove diaphragm)
A A
Fixing and removing the
detector from the support or
surface-mounted base
1
2
2
1
Fig. 15
I