DeWalt DCD990 Guide D'utilisation page 17

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAXIMUM RECOMMENDED CAPACITIES
DCD990
WOOD
Auger
1-1/4" (32 mm)
Paddle
1-1/2" (38 mm)
Twist
1/2" (13 mm)
Self-feed
2-9/16" (65 mm)
Hole saw
4" (100 mm)
METAL
Twist
1/2" (13 mm)
Hole saw
1-3/8" (35 mm)
MASONRY
Carbide
Repairs
The charger and battery pack are not serviceable. There are no
serviceable parts inside the charger or battery pack.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments should be performed by a D
center, a D
WALT authorized service center or other qualified service
e
personnel. Always use identical replacement parts.
DCD995
1-1/4" (32 mm)
1-1/2" (38 mm)
1/2" (13 mm)
2-9/16" (65 mm)
4" (100 mm)
1/2" (13 mm)
1-3/8" (35 mm)
1/2" (13 mm)
WALT factory service
e
Register Online
Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
• CONFIRMATION OF OWNERSHIP: In case of an insurance
loss, such as fire, flood or theft, your registration of ownership will
serve as your proof of purchase.
• FOR YOUR SAFETY: Registering your product will allow us to
contact you in the unlikely event a safety notification is required
under the Federal Consumer Safety Act.
Register online at www.dewalt.com/register.
Three Year Limited Warranty
D
WALT will repair, without charge, any defects due to faulty materials
e
or workmanship for three years from the date of purchase. This
warranty does not cover part failure due to normal wear or tool abuse.
For further detail of warranty coverage and warranty repair information,
visit www.dewalt.com or call 1-800-4-D
This warranty does not apply to accessories or damage caused where
repairs have been made or attempted by others. This warranty gives
you specific legal rights and you may have other rights which vary in
certain states or provinces.
In addition to the warranty, D
e
1 YEAR FREE SERVICE
D
WALT will maintain the tool and replace worn parts caused by
e
normal use, for free, any time during the first year after purchase.
2 YEARS FREE SERVICE ON D
DC9071, DC9091, DC9096, DC9280, DC9360, DC9180,
DCB120, DCB127, DCB201, DCB203, DCB203BT, DCB207
15
WALT (1-800-433-9258).
e
WALT tools are covered by our:
WALT BATTERY PACKS
e

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dcd995

Table des Matières