Mounting The Hood - Zephyr Pisa ZPI-E24BG Guide D'utilisation, D'entretien Et D'installation

Installation Instructions

Mounting the Hood

1. Prepare electrical wiring and ducting in cabinet. Location of the junction box and blower outlet
can be found on page 12. NOTE: Only 24" models have upper and lower brackets.
16
2. Open cabinet doors. Lift range hood
and slide it through the opening located
in the bottom of the cabinet. Make sure
opening matches the dimensions from
FIG. B.
3. There are spring clips located on the
left and right sides of the hood body
which will temporarily hold the hood in
place. If installing a 30" or 36" model,
skip to step 8. If installing a 24" model,
continue.
4. 24" Models Only. Secure upper brackets
to left and right sides of hood body by
using (2) 3/16 x 3/8" screws for each
bracket. Make sure the (2) captive nut
screws holes on the bracket are facing
downward.
5. 24" Models Only. Place lower installation
brackets under upper installation
brackets located on left and right sides
of hood body. The wider portion of the
lower installation bracket should be at
the bottom.
Pisa Use, Care, and Installation Guide
C O R E
P I S A
U N D E R - C A B I N E T