Preparing The Cabinet - Zephyr Pisa ZPI-E24BG Guide D'utilisation, D'entretien Et D'installation

Installation Instructions

Preparing the Cabinet

1. Determine and mark center line on wall and cabinet bottom with a pencil.
2. If the cabinet bottom is recessed, wood blocking must be installed to ensure proper alignment of
the hood with the cabinet bottom. Wood blocking should be flush within cabinet bottom.
3. Follow the dimensions in FIG. B and cut-out the bottom of your cabinet to create an opening for
the hood to fit through. For frameless cabinet measure 1-15/16" from the front of cabinet door. For
framed cabinet measure 1-15/16" from front of cabinet bottom.
14
7"
7-3/4"
7"
*6-3/16"
19-7/8"
C/L
*Dimension used for rear ducting option
FIG. B
glass handle
FIG. C
Pisa Use, Care, and Installation Guide
front edge
C O R E
P I S A
U N D E R - C A B I N E T