Makita DUB184 Manuel D'instruction page 3

Masquer les pouces Voir aussi pour DUB184:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.
Always use protective goggles, a cap and
mask when using the blower. Ordinary eye or
sun glasses are NOT safety glasses.
4.
To prevent dust irritation the wearing of a face
mask is recommended.
While operating the machine, always wear non-
5.
slip and protective footwear. Non-skid, closed-toed
safety boots and shoes will reduce the risk of injury.
Operation
Never operate the blower while people, espe-
1.
cially children, or pets are nearby.
2.
Switch off the blower and remove the battery
cartridge and make sure that all moving parts
have come to a complete stop
whenever you leave the blower.
before clearing blockages.
before checking, cleaning or working on
the blower.
if the blower starts to vibrate abnormally.
3.
Operate the blower only in daylight or in good
artificial light.
4.
Do not overreach and keep proper balance and
footing at all times.
5.
Never blow debris in the direction of
bystanders.
Operate the blower in a recommended position
6.
and on a firm surface.
7.
Do not operate the blower at high places.
8.
Never point the nozzle at anyone in the vicinity
when using the blower.
9.
Never block suction inlet and/or blower outlet.
Be careful not to block suction inlet or
blower outlet with dust or dirt when oper-
ating in dusty area.
Do not use nozzles other than the nozzles
provided by Makita.
Do not use the blower to inflate balls,
rubber boat or the similar.
10. Do not operate the blower near open window,
etc.
11.
Operating the blower only at reasonable hours
is recommended - not early in the morning or
late at night when people might be disturbed.
12. Using rakes and brooms to loosen debris
before blowing is recommended.
13. If the blower strikes any foreign objects or
should start making any unusual noise or
vibration, immediately switch off the blower
to stop it. Remove the battery cartridge from
the blower and inspect the blower for damage
before restarting and operating the blower. If
the blower is damaged, ask Makita Authorized
Service Centers for repair.
14. Do not insert fingers or other objects into
suction inlet or blower outlet.
15. Prevent unintentional starting. Ensure the
switch is in the off-position before inserting
battery cartridge, picking up or carrying the
blower. Carrying the blower with your finger
on the switch or energizing the blower that has
the switch on invites accidents.
16. Never blow dangerous materials, such as
nails, fragments of glass, or blades.
17. Do not operate the blower near flammable materials.
18. Avoid operating the blower for a long time in
low temperature environment.
Maintenance and storage
1.
Keep all nuts, bolts and screws tight to be sure
the blower is in safe working condition.
2.
If the parts are worn or damaged, replace them
with parts provided by Makita.
3.
Store the blower in a dry place out of the reach
of children.
4.
When you stop the blower for inspection, ser-
vicing, storage, or changing accessory, switch
off the blower and make sure that all moving
parts come to a complete stop, and remove the
battery cartridge. Cool down the blower before
making any work on the blower. Maintain the
blower with care and keep it clean.
5.
Always cool down the blower before storing.
6.
When you lift the blower, be sure to bend your
knees and be careful not to hurt your back.
Battery tool use and care
1.
Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to battery pack, picking up or carrying the
machine. Carrying the machine with your finger
on the switch or energizing machine that have the
switch on invites accidents.
2.
Disconnect the battery pack from the machine
before making any adjustments, changing
accessories, or storing machine. Such preven-
tive safety measures reduce the risk of starting the
machine accidentally.
Recharge only with the charger specified by
3.
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
4.
Use machines only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
5.
When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
6.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid con-
tacts eyes, seek medical help. Liquid ejected from
the battery may cause irritation or burns.
Do not use a battery pack or machine that is
7.
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
Do not expose a battery pack or machine to
8.
fire or excessive temperature. Exposure to fire
or temperature above 130°C (265°F) may cause
explosion.
9.
Follow all charging instructions and do not
charge the battery pack or machine outside of
the temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside of the specified range may damage the
battery and increase the risk of fire.
3 ENGLISH

Publicité

Table des Matières
loading

Table des Matières