Technical Information; Installation Considerations - Hansgrohe AXOR Massaud 18010001 Instructions De Montage / Mode D'emploi / Garantie

18010001
1810001

English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - lav
Flow rate - bidet
Hole size in mounting surface
18010001
1810001
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• Model 18010001 includes 10 mm supply hoses.
The included filters and adapters must be used.
• Model 18010001 does not include a drain or a
pull rod.
• The lavatory faucet is equipped with a flush
stream, which enhances the natural side of the
life element water. As this flush stream does not
contain any air, we recommend the use of Axor
Massaud sinks or very deep sinks to prevent
splashing.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
10° - 140° F*
176°F*
1.5 GPM
. GPM
1¼"
1⅜"
1⅝"