Operation
Selecting the input source
You can select the input source and colour system.
INPUT
1
Press (POWER).
On the card remote commander, press
The power is turned on.
2
Press (INPUT) to select the desired input source.
Each time you press (INPUT), the indication changes in the following sequence:
VIDEO 1
To select the connected navigation system
Press (INPUT) repeatedly to select "NAVI".
3
Press M or m ((VOLUME) (+) or (–) on the monitor) to select PAL or NTSC
system.
Press either button while the source indication (such as "VIDEO 1") is displayed.
When NTSC Video is selected
VIDEO1
NTSC
10
POWER
VOLUME
+/−
.
{/1
VIDEO 2
NAVI
When PAL Video is selected
VIDEO1
PAL
ATT
INPUT
MENU
MODE
INPUT
VOL
`/1
`/1
V/v