Network Configuration Request Frame; Frame For Adding An Offset To Pulse Counters; Specific Register Value Request Frame - ADEUNIS sigfox RC4 Pulse Guide Utilisateur

sigfox RC4 Pulse - Guide utilisateur / User guide version V1.0.0

4.2.2 Network configuration request frame

This frame allows to inform the product via the network that it must resend the network configuration uplink frame (0x20).
0
Code PAYLOAD
FR
0x02

4.2.3 Frame for adding an offset to pulse counters

These frames (0x03 and 0x04) allows to add an offset to the counter value on each channel.
EN
0
Code
0x03
0x03
Its size is of 5 bytes.
Description of the frame :
• Bytes 1 to 4: Offset - channel A : numbers of pulses to add to current index of the meter (channel A) (unsigned 32-bits, MSB first).
In the example in grey this gives:
• Bytes 1 to 4 =0x00000015 so 21 pulses to add to channel A counter
0
Code
0x04
0x04
Its size is of 5 bytes.
Description of the frame :
• Bytes 1 to 4: Offset - channel B : numbers of pulses to add to current index of the meter (channel B) (unsigned 32-bits, MSB first).
In the example in grey this gives:
• Bytes 1 to 4 = 0x00000050 so 80 pulses to add to channel B counter

4.2.4 Specific register value request frame

This frame (0x40) allows to inform the product via the network that it must send the values of specific registers.
Frame 0x40 :
0
Code PAYLOAD
0x40 CONFID1
1 2
X X
1 to 4
Offset - A-channel
0x00000015
1 to 4
Offset - B-channel
0x00000050
1 2
CONFID2
3 4
X X
3 4
CONFID3 X
5 6
X X
5 ...
X X
7
X
7
CONFIDn
Page 88 of 101