Bartscher 110.709 Mode D'emploi page 29

Defrost
Automatic defrost
The device automatically defrosts 3 times per 24 hours. The internal clock is activated the
first time the device is turned on.
If you want to reset the automatic defrost cycle, press and hold
The display will show the symbol
defrost, then the next defrost will begin in 8 hours.
Manual defrost
Manual defrost can be activated at any time in addition to automatic defrost: to do so,
press and hold
Manual defrost will begin, and the display will show the symbol
NOTE!
If you wish to change other settings or parameters, instructions on how to do so
can be found in the information included concerning temperature control, or such
changes can be performed by qualified service personnel.
Tips for the user
•
The cooled table should be filled when it reaches the desired temperature, which will
be readable on the display.
•
Never place warm food products, liquids or uncovered food products inside the
refrigerated cabinet.
•
Use hermitically sealable containers for storing food products and beverages, to
prevent mixing of aromas inside the cooled table.
•
When first filling the cooled table, open and fill only one shelf to prevent the device
from tipping over.
•
While placing products inside the cooled table, ensure that sufficient space is left
between the inside walls of the device and food products, in order to guarantee
proper air circulation inside the device.
•
More items inside the cooled table, as well as opening the doors / drawers often
increase energy use and accelerate the appearance of defects.
•
To reduce cold loss, keep doors and drawers open for as short a time as possible,
and do not open them too often.
- 28 -
The device will immediately begin automatic
.
for over 3 seconds.
for over 3 seconds.
.