Asko CI41236S Mode D'emploi page 7

USE
Switch on intensive setting:
• Press and hold the '+' button (8) for approximately 2 seconds.
The intensive setting (setting 'P') is switched on for ten minutes
(depending on the model). The display will flash (5) during this
period. The original extraction setting will be reactivated after this
period.
• Quickly press and release the '+' (8) button to switch off the
intensive setting.
Switching on the timer
• Press the timer button (9).
The timer indicator (6) will light up
The cooker hood will switch off automatically after 10 minutes.
• Switch off the timer function by pressing the '-' button '2'.
If the lighting is lit its strength will be reduced automatically by 30-40%
once the timer has finished.
Note!
If the intensive setting has been selected you cannot activate the timer
function.
Clean Air function
The Clean Air function allows you to freshen the air in your kitchen for a
maximum of 12 hours.
• Switch off the cooker hood.
• Press and hold the timer button (9) for approximately 4 seconds.
The cooker hood will switch on automatically for 10 minutes every
hour at the lowest speed setting. During extraction the Clean Air
indicator will flash (7).
When the hood switches off after 10 minutes, the Clean Air
indicator (7) will be lit continuously until the hood switches on
again after 50 minutes.
• Switch off the Clean Air function in the meantime by pressing a
random button (except the one for lighting).
EN 7