Asko CI41236S Mode D'emploi page 20

INSTALLATION
3
B
C
2
Fig.12
- Tilt the hood as indicated in
Figure 12 – step 1.
- Use the two pivot pins C that are
already present in the construction to hang
the hood on the bracket B. Figure 12 - steps
2-3.
- Put the hood in position so that the safety
pin clicks in the gap in the bracket B.
Figure 12 – step 4.
EN 20
click
4
1
D
B
Fig.13
- Please note! Secure the hood directly onto
the bracket B with the 6 screws D (Fig.13).
L
1
2
M
Fig.14
- Take the safety bracket L and secure this to
the ceiling plate with the two screws M as
indicated in Figure 14 – steps 1-2.
D
M