Double Insulation; General Power Tool Safety Warnings - Dolmar HT-42 Manuel D'utilisation Et De Sécurité

ENGLISH
1. Switch trigger B
2. Switch trigger A
3. Switch trigger C
4. Hook complete
5. Tool's cord
6. Extension cord
7. Hook
8. Tool
SPECIFICATIONS
Blade length
Strokes per minute (min
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual and follow the
warnings and safety instructions.
Wear eye protection.
Wear ear protection.

DOUBLE INSULATION

Caution: particular care and attention
required!
Caution: withdraw the mains plug
immediately if the cable is damaged!
Protect against rain and damp!
Wear safety gloves!
Withdraw the mains plug!
First aid
Recycling
Explanation of general view
9. Holder
10. Waist cord hook
11. Cord
12. Arm cord hook
13. Trimming direction
14. Tilt the blades
15. Hedge surface to be trimmed
16. Press
Model
-1
)
END220-2
17. Chip receiver
18. Nut
19. Shear blade
20. Hooks
21. Fit the hooks into hole
22. Holes
23. Press the hooks on both sides
24. Unlock the hooks
HT-42 HT-48
420 mm 480 mm
1,600 1,600
821 mm 871 mm
2.8 kg 2.9 kg
CE marking
Prohibited!
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electrical and
electronic equipment and its
implementation in accordance with
national law, electric equipment that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
Intended use
The tool is intended for trimming hedges.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
HT-52
520 mm
1,600
921 mm
3.0 kg
/II
ENE014-1
GEA005-2
5