babymoov Balancelle Bubble New Generation Notice D'utilisation page 15

Masquer les pouces

page de 36

/ 36
Signets

Les langues disponibles

W RNING : before assembly take all the items out of the box and identify them.

a. Left front leg

b. Right front leg

c. Left back leg

d. Right back leg

e. Left side leg

f. Right side leg

g. Left swing leg

h. Right swing leg

i. Early learning arch

j. Protective masks

1. ssembling the baby swing legs

Insert the left back leg (c) in the right back leg (d). Make sure the right back leg press stud (d) fits well into the orifice of the left back leg (c). The letters

D+D have to be joined together. Figure 1 In the same way insert the left front leg (a) into the right front leg (b). Make sure the left front leg press

stud (a) fits well into the orifice of the right front leg (b). The letters C+C have to be joined together. Figure 2 For the operation to be completed correctly

the user has to hear a "click" and see a grey press stud appear on the side of the opposite leg.

2. ssembling the swing arms

Insert the left side leg (e) in the left front (a) and left back leg (c) so that the letters + are joined together as well as the letters B+B. Figures 3 and

4 Insert right side leg (f) in the front right (b) and right back leg (d) and then click on the front legs. Figure 5 To unfold the legs press the folding buttons

(n) on the sides of the side legs (e) and (f). For the operation to be completed correctly the user has to hear a "click" and see a grey press stud appear

on the side of the opposite leg. Figure 6

3. ssembling the baby swing seat

To install the seat (k), insert the right swing leg (h) on the side of the electronic panel (m), and the left swing leg (g) on the opposite side. Figures 7,

8, 9, 10 and 11 Fix the swing arms with the protective masks (j) in the orifices provided for the purpose. Figures 12, 13, 14 and 15

4. Installing the protective cover

W RNING: never use the baby swing without its protective cover.

Pivot the seat arches (k) upwards until they join. Figure 16 Cover the seat arches (k) with the protective cover (q). In order not to put the protective

cover on the wrong way (q) make sure the Babymoov logo is facing downwards. Figure 17

Push the two seat arches apart (k) while sliding the protective cover (q) along the two arches. Figures 18, 19 and 20

5. Installing the early learning arch (i)

W RNING: never use the early learning arch to lift the baby swing.

Insert the early learning arch (i) in the slots placed for the purpose. Figures 21 and 22

6. Installing the headrest (l)

W RNING: never add a pillow, blanket, or padding; only use the headrest supplied with your baby swing. The headrest (l) is an optional item that

gives the baby's head extra support for optimum comfort. This item can be detached from the baby swing.

To attach or detach the headrest (l) it is enough to use the Velcro strip behind the headrest; it has to be slipped on the protective cover (q). Figure

7. Installing the batteries

The electronic panel (m) of the baby swing has to be powered by 4 1.5V

Use a cross-head screwdriver (not supplied) to open the electronic panel (m) on the right swing leg (h). Figure 24 Insert the 4 1.5V

supplied) while respecting the marks of polarity as shown on the display. Figure 25

Screw the electronic panel (m) back on with a screwdriver. Do not over-tighten.

8. Connecting to the mains (adapter supplied) (p)

IMPORT NT: before any operation make sure your baby swing is switched off.

The baby swing can function connected to a mains socket with the aid of the adapter supplied.

Input: 230V / 50Hz

Output: 6V / 500Ma

The adapters must be examined to detect any eventual damage to the lead, plug, panel and other parts. If any damage is detected do not use

the appliance.