Domo DO7111S Mode D'emploi page 26

SELF-CLEANING FUNCTION
After a few hours of ironing, the self-cleaning function's indicator light will start flashing. This means you
need to clean the iron.
1. Hold the iron above a sink or place it on an oven rack in the sink. Attention: you may not leave the
iron on the base.
2. Turn the temperature dial to 'CLEAN'. Hold down the Steam Jet and
Steam Buttons simultaneously for a few seconds to start cleaning. The
temperature indicator light will flash during the descaling process.
3. The pump will allow water to flow through the iron, cleaning it itself. This
will take about one minute.
4. If the appliance has been cleaned sufficiently, the appliance will turn of
automatically.
ENVIRONMENTAL GUIDELINES
26
DO7111S
This symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it must be brought to
the applicable collection point for recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
The packaging is recyclable. Please treat the packaging ecologically.