Publicité
Les langues disponibles
Les langues disponibles
TAVOLI REFRIGERATI
13. Routine Maintenance
ENG
In order to make ad adequate maintenance of the appliance, the user, the maintenance man or the non-
specialized staff must firstly keep in mind the elementary safety rules quoted on paragraph n. 3
GENERAL INFORMATION.
Then, it is also compulsory to not remove the safety devices and the protections during the routine
maintenance.
OTHERWISE, THE PRODUCING COMPANY DECLINES ANY RESPONSIBILITY FOR
DAMAGES OR ACCIDENTS RESULTING FROM THE FAILURE TO COMPLY WITH THE
ABOVE-STATED OBLIGATION.
Considered the previous rules, the cleaning of the cooled storage must be done daily, in order to guarantee
the best quality and the perfect hygiene of the treated products. Use water and non-abrasive cleansing
agents. Wash and rinse using a cloth or a sponge.
N.B. NO SHARP OR ABRASIVE INSTRUMENTS, NO SOLVENTS OR DILUENTS
For a better air circulation, keep clean also the condensing unit (part 19) removing from its wings dust
etc. To reach the condensing unit, you must pull out the plug from the electrical socket, and unscrew the
front panel (part 16) paying attention on not putting in excessive traction the electrical connections. Use a
vacuum cleaner in order of not having a dispersion of dust. Do not scrape with sharp or abrasive
instruments.
At the end, reassemble the front panel closing the fixing screws.
In case of extraordinary maintenance to the refrigerating system, it is possible to remove the lateral panel,
but such operations can be made exclusively by refrigerator or authorised technicians, and only after
having pull out the plug from the electrical socket.
N.B. Maximum capacity for lever 20 Kgs. each.
13.1 Electric wire substitution
If the electric wire is damaged, the substitution must be done by the producing company, by its assistance
service, or by a qualified engineer. In any case, be sure of having unplugged before proceeding in such
operation.
14
Ed.10/2011
Publicité
